|
|
|
|
|
|
Bugholes T Shirt Whiskey
|
|
|
Bugholes T Shirt
Heavy Cotton
Pick your size and color
|
|
|
|
|
|
|
|
|
|
Bugholes T Shirt Faith
|
|
|
Bugholes T Shirt
Heavy Cotton
Pick your size and color
|
|
|
|
|
|
|
|
|
|
Bugholes Hat
|
2 in stock!
|
|
|
Bugholes Hats
Adjustable Velcro strap
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut 1.06" x 20 TPI 1.25" Breech
|
Usually Ships in 24 Hours
Our Price: $25.00
|
|
|
This is the BUG NUT barrel nut for use with the Savage small shank, Bighorn, and Mausingfield actions with 1.06"x20 tenon threads. This nut is designed for larger breech barrels with a breech of 1.20" to 1.25".
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut 1.06" x 18 TPI 1.20" Breech
|
Usually Ships in 24 Hours
Our Price: $25.00
|
|
|
This is the BUG NUT barrel nut for use with the following actions:
Atlas, BAT, and others with 1.06"x18 tenon threads.
This nut is used for barrels with a breech of 1.20"
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
|
|
|
|
|
|
BUGNUT Barrel Nut Tikka/Ruger American Magnum 1" x 16 TPI 1.20" Breech
|
Usually Ships in 24 Hours
Our Price: $25.00
|
|
|
BugNut barrel nut for use with the following actions:
Tikka or Ruger American with 1"x16tpi tenon threads.
This nut is used for barrels with a breech of 1.20" it is the Magnum Tikka Bugnut
*** Uses the std BugNut wrench ***
***The Tikka/Ruger Bugnuts are not designed to work with factory barrels with a .990" shank - only custom barrels cut to fit ***
**** Due to the rising cost to make these parts we are halting production on new parts until further notice. ****
|
|
|
|
|
|
|
|
|
|
Accuracy International Wrench Offset Drive Link
|
Usually Ships in 24 Hours
Our Price: $25.00
|
|
|
This Offset Drive Link must be used with the Bugholes Accuracy International action wrench if you have a fixed stock AND wish to use a ratcheting head wrench for torqueing. It is made from 4140 pre-hardened chrome moly steel and will adapt a 1/2" drive ratcheting wrench to the 5/8" hex on the AI wrench shaft. ***You do not need the Offset Drive Link if youre using a breaker bar with standard size socket, or having a folding stock **** **** Link won't fit the other wrenches - Rem 700, Tikka, etc ****
***200 Ft-Lbs MAX***
|
|
|
|
|
|
|
|
|
|
Thread Protector SS 5/8-24tpi
|
Usually Ships in 24 Hours
Our Price: $35.00
|
|
|
5/8-24 Stainless thread protector, .995 OD, 1.00 long, with a .3 dia blind hole. will accept a .700" tenon, approx .100" of thread relief with a .125 wide slot for applying torque via flat tool of you choice (the back of your pocket knife)
**** This is designed to be turned and blended to barrel diameter. ****
|
|
|
|
|
|
|
|
|
|
Thread Protector SS 1/2-28tpi
|
Usually Ships in 24 Hours
Our Price: $35.00
|
|
|
1/2-28 Stainless thread protector, .995 OD, 1.00 long, with a .3 dia blind hole. will accept a .700" tenon, approx .100" of thread relief, .125 wide slot for applying torque via flat tool of you choice (the back of your pocket knife)
**** This is designed to be turned and blended to barrel diameter. ****
|
|
|
|
|
|
|
|
|
|
Thread Protector SS 3/4-24tpi
|
Usually Ships in 24 Hours
Our Price: $35.00
|
|
|
3/4-24 Stainless thread protector, .995 OD, 1.00 long, with a .3 dia blind hole. will accept a .700" tenon, approx .100" of thread relief, .125 wide slot for applying torque via flat tool of you choice (the back of your pocket knife)
**** This is designed to be turned and blended to barrel diameter. ****
|
|
|
|
