Zermatt Origin Short action, 308 bolt face, LEFT bolt LEFT port with 20 MOA picatinny rail. These actions have an extended ejection port and feed lips for use of a hinged floor plate or detachable mag. Floating controlled round feed bolt head, sliding plate extractor, mechanical ejector, savage small shank threads 1 1/16" x 20 TPI. Black nitrided finish.

**** Not cut for Wyatt's extended BDL box ****

Zermatt Origin Short action, 308 bolt face, right bolt right port with 20 MOA picatinny rail. These actions have an extended ejection port and feed lips for use of a hinged floor plate or detachable mag. Floating controlled round feed bolt head, sliding plate extractor, mechanical ejector, savage small shank threads 1 1/16" x 20 TPI. Black nitrided finish.

**** Not cut for Wyatt's extended BDL box ****

.308 Short action right hand, right eject.
.068 firing pin

Kelbly's Atlas is a Remington semi-clone action, side bolt release, trigger hanger, Nitride finish action body, a fluted, black nitrided bolt, side bolt stop, 20 MOA anodized picatinny rail, a dual pin recoil lug, and a standard ball shaped knob. This action cut for Accuracy International center feed magazines. One of the key features of this action is the TG ejector, it is a mechanical ejector that does not put any chamber pressure on the round. It is also a “never fail” setup, meaning that there are no springs to get gummed up and stop working.

This action has a trigger hanger and there is little modification necessary to use a Remington 700/40x stock or chassis.